Floor Polishing Service for homes and businesses in Gulshan 2
Floor polishing is a grinding process, not a wax job. Diamond pads of decreasing grit are worked across the stone in sequence, each one removing the scratch pattern left by the last, until the surface is flat and reflective. A crystallising agent or sealer is applied at the end to harden and protect it.
In Gulshan 2, the residences are large and the entry procedure is formal — floor polishing is booked ahead, with names and NID numbers cleared before the day. We handle floor polishing in Gulshan 2 for both households and businesses, and the scope is written differently for each.
What Gulshan 2 is like: Gulshan 2 is the address for embassies, country offices of international organisations and the households attached to them, which sets a high and fairly formal standard for any contractor entering a building. Large apartments of 2,500–5,000 sq ft, standalone diplomatic residences and premium serviced blocks.
Why floor polishing matters in a neighbourhood like Gulshan 2
Marble and mosaic floors dull for a mechanical reason: grit tracked in on shoes is harder than the stone, and every footstep grinds microscopic scratches into the surface. Enough of them and the floor stops reflecting light evenly, which reads as dull. No cleaning product fixes this, because nothing is sitting on top of the stone — the stone itself has been abraded.
Getting to you in Gulshan 2
Most buildings and all diplomatic properties require staff NID details and advance notice before entry, so bookings here are scheduled a day or two ahead.
We work across Gulshan 2 including the areas around Gulshan Circle 2, Gulshan Society Lake Park, Unimart and Westin Dhaka.
Read the full explanation of how floor polishing service works →
What to know before booking in Gulshan 2
- Clearance before the date
- Entry to Gulshan 2 properties needs staff names and NID numbers submitted in advance. Give us two working days and the clearance is done before the team leaves our office.
- Escorted working
- Teams in Gulshan 2 normally work escorted, with bags checked in and out. Our supervisors are used to the procedure and brief the crew before arrival.
- Discretion as standard
- No photographs, no phones out on site, and nothing discussed outside the job. Staff working in Gulshan 2 are briefed on this every time.
What our floor polishing in Gulshan 2 includes
- Floor survey to identify the stone and measure the damage
- Edges and corners cut in by hand machine
- Diamond grinding sequence across the full floor
- Honing to level out scratch patterns and lippage
- Slurry extraction and full rinse between grits
- Crystallisation or penetrating sealer as the stone requires
- High-speed buffing to final gloss
- Skirting and adjacent surfaces cleaned of slurry
Problems this solves in Gulshan 2
- Contractors who cannot clear the security procedure Gulshan 2 properties require
- Fine scratch haze in the main walking lanes
- Etch marks where acid or citrus was spilled
- Uneven lippage between tiles that catches the foot
- Yellowed old wax build-up on mosaic floors
- Dull, cloudy marble that no mop improves
How the job runs, step by step
-
1
Assess the stone
Marble, granite, mosaic and terrazzo all behave differently. The technician identifies the stone and the depth of damage before choosing a starting grit.
-
2
Mask and protect
Doorways, skirting, furniture and any wooden thresholds are sealed off — grinding produces a fine slurry that travels.
-
3
Grind and hone
Coarse to fine diamond pads in sequence. Each pass removes the previous pass's scratch pattern.
-
4
Crystallise or seal
Marble is crystallised with a chemical and steel wool under a weighted machine. Granite and mosaic are sealed instead.
-
5
Buff and hand over
A high-speed buff brings up the final gloss, then the floor is cleaned down and inspected in raking light.
Surfaces we handle
Equipment and materials
When to book it
Dry-season work is faster because the floor must be completely dry before sealing.
Recommended interval: Full polish every 2–3 years; a maintenance buff every 6 months keeps it there.
Book Floor Polishing Service in Gulshan 2
Call for a same-day quote, or send the details on WhatsApp and we will reply with availability and a price.
Floor Polishing Service in Gulshan 2 — frequently asked questions
Do you provide floor polishing in Gulshan 2?
Yes. Gulshan 2 is inside our regular service area and our teams work in Gulshan Belt every week. Call 01913-808807 or send a WhatsApp message and we will confirm the next available slot.
How soon can a team reach Gulshan 2?
Most buildings and all diplomatic properties require staff NID details and advance notice before entry, so bookings here are scheduled a day or two ahead. For most bookings in Gulshan 2 we can schedule within 24 to 48 hours, and sooner for urgent work.
Will it be very dusty?
Wet grinding produces slurry rather than airborne dust, and we extract it as we go. Rooms are sealed off, but this is much cleaner than dry grinding.
Can you fix etch marks from lemon or acid?
Yes. Etching is physical damage to the stone surface, and grinding is exactly the right repair for it.
How long before we can walk on it?
Immediately after buffing for a polish. If a penetrating sealer is used, keep off it for the cure time we specify, usually six to twelve hours.
Can you polish mosaic floors in an old building?
Yes, and it is one of the most dramatic improvements available. Old mosaic responds very well once the accumulated wax is ground off.